What is a relief valve
A relief valve for a widespread use of water pipes, power generation and other applications, of which a pressurized pipeline material to keep the pressure on the line over the valve. A relief valve can also be installed as a safety device to prevent the pressure building, when combined, sensors and alarm system, it can be on the alert, an operator of the problem, along the line. Many consumers have a relief valve or two and around their homes, especially those who use propane for heating and cooking fuel. In most cases, dial-up pressure relief valve installed in it, indicating that the conditions of the road.
A relief valve works by sensing the pressure, from themselves. The pressure valve with the specified level, it has maintained through the use of a spring mechanism, open, the inlet, or the lower reaches of the pressure began rising at the same time, the upper reaches of the pressure drop. In case of emergency, in which the air pressure is too high, some of the relief valve designed to remind operators, while others may fail. Individual intends to install a relief valve should consider their needs and choose the most appropriate relief valve.
Installation, a relief valve, it is suggested that pressure over the rated maximum system pressure, which would prevent the failure except in the case of extreme disaster. The installation of a security closure of a valve from the relief valve can also be used to prevent excessive pressure within the United Nations system. It also recommended that the relief valve be protected from the particles may, in the pipeline installation and use of a regular service of the filter dropped from the relief valve.
Usually, shut-off valve in the pipe and the decline of the relief valve, relief valve into the maintenance and replacement. If the total closure of the system is not likely, it is necessary to install a bypass line, so that the system can continue to operate, and the relief valve is now services. In the case of harmful substances, a relief valve should include a good seal and leakage line to contain the potential leak.
A relief valve works by sensing the pressure, from themselves. The pressure valve with the specified level, it has maintained through the use of a spring mechanism, open, the inlet, or the lower reaches of the pressure began rising at the same time, the upper reaches of the pressure drop. In case of emergency, in which the air pressure is too high, some of the relief valve designed to remind operators, while others may fail. Individual intends to install a relief valve should consider their needs and choose the most appropriate relief valve.
Installation, a relief valve, it is suggested that pressure over the rated maximum system pressure, which would prevent the failure except in the case of extreme disaster. The installation of a security closure of a valve from the relief valve can also be used to prevent excessive pressure within the United Nations system. It also recommended that the relief valve be protected from the particles may, in the pipeline installation and use of a regular service of the filter dropped from the relief valve.
Usually, shut-off valve in the pipe and the decline of the relief valve, relief valve into the maintenance and replacement. If the total closure of the system is not likely, it is necessary to install a bypass line, so that the system can continue to operate, and the relief valve is now services. In the case of harmful substances, a relief valve should include a good seal and leakage line to contain the potential leak.
10:13
|
标签:
Relief Valve,
Valves
|
This entry was posted on 10:13
and is filed under
Relief Valve
,
Valves
.
You can follow any responses to this entry through
the RSS 2.0 feed.
You can leave a response,
or trackback from your own site.
订阅:
博文评论 (Atom)
0 评论:
发表评论